How To Change Oil Filter In 1993 Chevy S10

How to Change the Oil Filter on a Chevrolet Southward-ten

by Jeffrey Caldwell

tools image by CraterValley Photo from Fotolia.com

The oil filter on a Chevrolet S-10 pickup is located on the underside of the engine block and filters small-scale particles out of the engine oil. Because of the tight tolerances in modern automotive engines, relatively small-scale particles can cause serious damage to valve train and/or crankshaft bearings if allowed to broadcast freely inside the oil system. In years past it was brash to change the oil filter with every other oil modify; just considering oil filters are relatively inexpensive, they are normally replaced at every oil change.

Removing the Oil Filter

Step 1

Raise the vehicle using an automotive jack, and back up it with jack stands placed underneath the front end frame.

Footstep 2

Locate the oil pan drain bolt on the oil pan on the underside of the engine. Identify a waste matter oil collection pan underneath it.

Step three

Unscrew the oil pan bolt using a wrench. (Be enlightened that oil volition begin to drain from the pan as presently as the commodities is removed.) Allow the oil to drain completely.

Step 4

Locate the oil filter on the underside of the engine cake. Place the waste oil collection pan underneath it.

Step 5

Unscrew the oil filter using a strap wrench. Let all the oil to drain from the oil filter mount.

Make clean the oil filter mounting surface using a rag. Be sure the one-time gasket is removed completely.

Installing the Oil Filter

Step 1

Completely coat the rubber gasket on the meridian of the new oil filter with fresh motor oil, using your finger.

Footstep ii

Make full the oil filter with fresh motor oil.

Step three

Screw the oil filter onto the oil filter fitting. Hand tighten the filter only.

Footstep 4

Spiral the oil pan bolt into the oil pan using a wrench.

Lower the vehicle using an automotive jack.

Filling the Engine With Oil

Pace 2

Locate the oil filler cap on the valve cover.

Stride 3

Remove the oil filler cap by turning information technology counterclockwise with your hand.

Step 4

Use a funnel and fill the engine with the appropriate amount of fresh motor oil as specified by Chevrolet.

Step v

Reinstall the oil filler cap.

Run the engine and visually inspect for leaks.

References

• "Chilton's Repair Transmission: Chevrolet S-10 GMC, S-15 Pick-Ups, 1982-91"; The Nichols/Chilton Editors; 1991
• "Chevrolet and GMC Southward-x & S-15 Option-Ups 1982 thru 1993 (Haynes Repair Manuals)"; John Haynes; 1988
• "Chevrolet Southward-x and GMC Sonoma Option-Ups 1994 thru 2004 (Haynes Repair Manuals)"; John Haynes; 2002

Tips

• Well-nigh auto parts stores will recycle waste product motor oil at no charge.

Things You'll Need

• Automotive jack
• Jack stands
• Waste oil collection pan
• Wrench set
• Strap wrench
• Rags
• Replacement oil filter
• Funnel
• Motor oil

Warnings

• Always follow the instructions listed in the owner'south transmission when lifting and lowering whatever vehicle. Failure to practice so could cause injury or decease.
• Prolonged exposure to used motor oil tin can cause skin diseases such equally cancer. Wear gloves to protect your skin.

Writer Bio

Jeffrey Caldwell has been a freelance writer for over five months and has published over 250 articles on websites like eHow and Trails.com. Caldwell writes articles on a wide range of topics including travel, camping and automotive mechanics. He has a Available of Arts in English language from Millersville University.

More Manufactures

How To Change Oil Filter In 1993 Chevy S10,

Source: https://itstillruns.com/change-oil-filter-chevrolet-s10-6062314.html

Posted by: mercerciat1967.blogspot.com

Share this post